Add Ip Sub-Group Details - M86 Security M86 User Manual

WF G A
ROUP DMINISTRATOR
402
S C
ECTION HAPTER
• IP Range
• Member IP address and netmask or IP address range,
and MAC Address(es) if using the mobile mode.
NOTE: See Appendix D: Mobile Client for information on using
the mobile mode.

Add IP Sub-Group Details

If the sub-group was not previously defined, the fields in the
IP Address frame and the Apply button remain activated.
Fig. 3:1-33 Sub Group (IP Group) window
1. In the IP Address frame, click the appropriate radio
button corresponding to the type of Member IP address
range to be entered: IP address with netmask, or IP
address range.
TIP: Use the IP Range pull-down menu to view the IP
address(es) that can be entered in these fields.
2. Corresponding to the selected radio button:
• enter the IP address and specify the netmask, or
1: P
OLICY SCREEN
, fields activated
M86 S U
ECURITY
G
SER UIDE