M86 Security M86 User Manual page 512

W F A
EB ILTER PPENDICES
484
S A D
ECTION PPENDIX
Optional: Specify URL for Mobile Client Updates
NOTES: A URL directory entry is required in the Automatic
Update Settings frame only if the Mobile Client Updater will be
installed on end user workstations and a Web server will be used
for deploying updated Mobile Client package configuration
updates to these workstations.
You do not need to specify a URL directory entry if you wish to
use the Web Filter (running software version 4.0 or higher) to
deploy updates to end user workstations. However, please note
that using the Web Filter to deploy updates could impact the
performance of the server.
For more information about using a host server for the Mobile
Client Updater, see MCU file preparations: Choose a deployment
host for updates.
1. In the Automatic Update Settings frame, click the ellipses
(...) button to the right of the Update URL Base field to
open the Add/Remove Update URL(s) dialog box:
Fig. D-18 Add/Remove Update URL(s)
2. In the Update source URL field, enter the URL of the
directory to be used for deploying Mobile Client package
configuration updates to mobile workstations with the
Mobile Client installed. The URL format should include
the protocol (e.g. "http"), the port number (if a port other
than port 80 is used), the host name, and directory name.
For example: http://www.mycompany.com/
mobile_client_updates
NOTE: Only the HTTP protocol is supported at this time.
M86 S U G
ECURITY SER UIDE