Enable, Configure Password Security Option - M86 Security M86 User Manual

SR S C
YSTEM ONFIGURATION
576
S C
ECTION HAPTER
• "Pages only" - Choose this option to include only Web
page hits in reports.
• "Pages and Objects" - Choose this option to include
both Web page and object hits in reports.
2. Click Apply to apply your setting.

Enable, Configure Password Security Option

In the Password Security Options frame, passwords for
accessing the SR user interface can be set to expire after a
specified number of days, and/or lock out the user from
accessing the SR after a specified number of failed pass-
word entry attempts within a defined interval of time.
NOTE: User accounts can be manually unlocked via System
Configuration: Network > Lockouts > Locked-out Accounts and
IPs (see Locked-out Accounts and IPs screen in this chapter).
1. Enable any of the following options:
• At the Password Expiration field, click the radio
button corresponding to either password expiration
option:
• Never - Choose this option if passwords will be set
to never expire.
• Number of 'x' days prior to expiration - Choose
this option if password will be set to expire after 'x'
number of days (in which 'x' represents the number
of days the password will be valid).
NOTES: The maximum number of days that can be entered is
365.
If a user's password has expired, when he/she enters his/her
Username and Password in the login screen and clicks Login, he/
she will be prompted to re-enter his/her Username and enter a
new password in the Password and Confirm Password fields.
2: C S
ONFIGURING THE ERVER
M86 S U
ECURITY SER
G
UIDE