Main Administrator; Bandwidth Range And Web Filter Setup - M86 Security M86 User Manual

SR R M
EPORT ANAGER
654
A S
DMINISTRATION ECTION

Main Administrator

1. In the Main Administrator section, type in the following
information: Username, Email address, Password,
Confirm Password.
NOTE: The username 'admin' cannot be used, since it is the
default username.
2. Make a selection from the Language pull-down menu if
you wish to change the language that currently displays
in the user interface to another language included in the
menu: English, Simplified Chinese, and Traditional
Chinese.
WARNING: If choosing another language from this menu, the
new language will immediately display in the user interface upon
saving your entries in this panel.
TIP: The Language setting field is also available in the Admin
Profiles panel, accessible to each administrator and sub-adminis-
trator. See Admin Profiles panel in Chapter 1 of this Section for
information about making Language setting changes.
NOTE: Click Save in the lower right corner of this panel after
making your entries and settings in this panel.

Bandwidth Range and Web Filter Setup

1. In the Bandwidth Range section, type in the IP Address
and Subnet Mask, and then click Add to include the
bandwidth IP address range in the list box below.
TIP: To remove the IP address range, select it from the list box
and then click Remove.
2. In the Web Filter Setup section, by default the first row in
the table is populated with an "X" in the Source column
and the Server Name and Server IP address of the Local
Web Filter.
C 2: D
HAPTER ATABASE
M
ANAGEMENT
M86 S U
ECURITY SER
G
UIDE