Use A Local Proxy Server; Use Proxy Port 80; Enable Https Filtering - M86 Security M86 User Manual

WF G A
LOBAL DMINISTRATOR
166
S C
ECTION HAPTER
NOTE: Basic Proxy Authentication must be used if using HTTPS
in a proxy environment. The Web Filter has been tested with ISA,
Blue Coat, and Squid proxies.

Use a Local Proxy Server

In the Proxy Setting frame, the default setting is "Off". To
specify that a local proxy server is used in the environment:
1. Click the "On" radio button. This selection indicates that
the Web Filter will perform a reverse lookup on packets
to detect the source address and origin of packets.
2. Click Apply to apply your setting.

Use Proxy Port 80

In the Proxy Port 80 Setting frame, the default setting is
"Disable". To specify that the public proxy server will
channel "https" traffic through Port 80:
1. Click the radio button corresponding to "Enable".
2. Click Apply to apply your setting.

Enable HTTPS Filtering

In the HTTPS Proxy Setting frame, indicate whether HTTPS
filtering will be allowed to pass by making these settings:
1. Click Enable HTTPS Proxy Setting to activate the
objects in this frame.
2. Enter the IP Address of each proxy server to recognize
HTTPS traffic, and then click Add to include that IP
address in the list box below.
TIP: To remove an IP address from the list box, select it and then
click Remove.
3. Click Apply to enable your settings.
1: S
YSTEM SCREEN
M86 S U G
ECURITY SER UIDE