View Data Storage Statistics - M86 Security M86 User Manual

View Data Storage Statistics

In the Status section of this screen, the date and time of the
last database expiration check displays in the Status bar.
The date displays in the YYYY-MM-DD format, and the time
displays in military time (01-24 hours) using the HH:MM:SS
time format.
NOTE: The Status date and time does not display if the server is
newly installed or has been reset to factory default settings. (See
Reset to Factory Defaults panel in Chapter 2 of the Report
Manager Administration Section for information about resetting
the server to factory default settings.)
The following data that displays is current as of the most
recent database expiration check:
• Date scope for total data - The first line in this field
NOTE: If the server has not yet expired any data, the first date
and time in the range is represented by "0" (zeroes).
• Database disk space utilization - The percentage of
• (used database space/total database space) - The
• Last 8 weeks hits/day average - The average number
NOTE: If the server has not yet expired any data, a "0" (zero)
displays in this field.
M86 S U G
ECURITY SER UIDE
SR S C
YSTEM ONFIGURATION
displays the range of weeks of data stored on the server,
represented in the YYYY-MM-DD - YYYY-MM-DD
format.
space currently being used on the hard drive for data
storage.
amount of space in Gigabytes currently being used on
the hard drive for data storage, and the total amount of
space in Gigabytes (Gbytes) on the hard drive allocated
to database storage.
of end user hits per day, based on the last eight weeks of
data stored on the server.
S C 2: C
ECTION HAPTER
S
ONFIGURING THE ERVER
571