M86 Security M86 User Manual page 192

WF G A
LOBAL DMINISTRATOR
164
S C 1: S
ECTION HAPTER
2. In the URI field, enter the Uniform Resource Identifier
that must specify the complete hostname and path of the
resource being requested. For example: icap://
icap.logo.com:1344/services/icap-services
NOTE: This string must match what is set up on the ICAP server
in order for the ICAP client's request to be accepted by the ICAP
server.
3. In the Max Connections (4-150) field, enter the
maximum connections the ICAP server will allow for
ICAP clients. By default, 30 displays.
4. In the Options TTL in Sections (0-86400) field, enter
the time (in seconds) in which the options response is
valid. By default, 3600 displays.
5. In the Preview Bytes (0-4096) field, enter the number of
bytes to be included in the response header to be sent by
the ICAP client for preview by the ICAP server, before the
entire request is submitted to the ICAP server. By default,
1024 displays.
6. In the Port field, enter the port number to be used by the
ICAP server. By default, this port number is 1344.
NOTE: The port number must be the same one entered for the
URI.
WARNING: Go to http://www.m86security.com/software/8e6/
hlp/ifr/files/1system_opmode_icap.html to review a list of
items to be considered when using the ICAP mode.
YSTEM SCREEN
M86 S U G
ECURITY SER UIDE