View Ntp Server Device Criteria; Refresh Settings - M86 Security M86 User Manual

SR R M
EPORT ANAGER
632
A S
DMINISTRATION ECTION
2. Click Close to close this pop-up window.

View NTP Server device criteria

1. Go to the image of the NTP Server in the Device Registry
panel and click View to open the NTP Server pop-up
window. The following information displays: Name of
server (NTP Server), Device Type (NTP Server), IP
address.
2. Click Close to close this pop-up window.

Refresh Settings

If using a Web Filter, a forced synchronization should be
performed on the SR unit if any of the source Web Filter's
related devices listed in the device registry are updated.
1. Click Refresh Settings to open the Refresh Settings
pop-up window:
Fig. 3:2-12 Refresh Settings
2. Check the checkbox(es) pertaining to information to be
synchronized between the Web Filter and SR devices,
and to activate the Synchronize button:
• Categories - Make this selection to synchronize M86
supplied library category updates and custom library
categories from the source Web Filter to the SR.
C 2: D
HAPTER ATABASE
M
ANAGEMENT
M86 S U
ECURITY SER
G
UIDE