Calculate Ip Ranges Without Overlaps - M86 Security Web Filter HL User Manual

I S
NTRODUCTORY ECTION
66
C 4: G S
HAPTER ETTING

Calculate IP Ranges without Overlaps

The Calculator button displays on windows in which IP
ranges are entered. These windows include: Range to
Detect and Members windows from the Policy section, and
Block Page Route Table window from the System section.
Fig. 1:4-14 IP Calculator window
This window is used to view and/or calculate the minimum
and maximum range for an IP address.
1. Click Calculator to open the IP Calculator window.
• If the IP address field in the window on the console is
already populated, note the IP Calculator window
displays the IP address, default Netmask in both the
Dotted Decimals Notation (e.g. "255.255.255.248")
and CIDR Notation (e.g. "29") format, Min Host, and
Max Host IP addresses.
• If the IP address field in the window on the console is
empty, in this window enter the IP address, specify the
Dotted Decimals Notation Netmask, and then click
Calculate to display the Min Host and Max Host IP
addresses.
TIP: If necessary, make a different IP address entry and Netmask
selection, and then click Calculate to display different Min Host
and Max Host results.
TARTED
M86 S U G
ECURITY SER UIDE