Fips Compliance; Configuration Considerations And Task List - HP 10500 Series Configuration Manual

No. Sub-attribute
205 Input-Interval-Gigawords
206 Output-Interval-Gigawords
207 Backup-NAS-IP
255 Product_ID

FIPS compliance

In Release 1208 and later versions, the device supports the FIPS mode that complies with NIST FIPS 140-2
requirements. Support for features, commands, and parameters might differ in FIPS mode (see
"Configuring

Configuration considerations and task list

To configure AAA on the NAS:
1. Configure the required AAA schemes.
Local authentication—Configure local users and the related attributes, including the usernames
and passwords for the users to be authenticated.
Remote authentication—Configure the required RADIUS and HWTACACS schemes. You must
configure user attributes on the servers accordingly.
2. Configure AAA methods for the ISP domain.
Authentication method—No authentication (none), local authentication (local), or remote
authentication (scheme).
Authorization method—No authorization (none), local authorization (local), or remote
authorization (scheme).
Accounting method—No accounting (none), local accounting (local), or remote accounting
(scheme).
Description
Amount of bytes input within an accounting interval, in units of 4G bytes.
Amount of bytes output within an accounting interval, in units of 4G bytes.
Backup source IP address for sending RADIUS packets.
Product name.
FIPS") and non-FIPS mode.
14