Network Setup - Cisco 8800 Series Administration Manual

Cisco IP Phone Web Page
Item
FIPS mode enabled

Network Setup

The Network setup area on a phone web page displays network setup information and information about other
phone settings. The following table describes these items.
You can view and set many of these items from the Network Setup menu on the Cisco IP Phone.
Some of the items in the following table do not apply to all phone models.
Note
To display the Network Setup area, access the web page for the phone as described in
Phone, on page
Table 44: Network Setup Area Items
Item
MAC address
Host name
Domain name
DHCP server
BOOTP server
DHCP
IP address
Subnet mask
Default router
DNS server 1–3
Alternate TFTP
TFTP server 1
TFTP server 2
Cisco IP Phone 8800 Series Administration Guide for Cisco Unified Communications Manager
272
Description
Indicates if the Federal Information Processing Standard (FIPS) Mode is enabled.
269, and then click the Network setup hyperlink.
Description
Media Access Control (MAC) address of the phone.
Host name that the DHCP server assigned to the phone.
Name of the Domain Name System (DNS) domain in which the phone resides.
IP address of the Dynamic Host Configuration Protocol (DHCP) server from which
the phone obtains the IP address.
Indicates whether the phone obtains the configuration from a Bootstrap Protocol
(BootP) server.
Indicates whether the phone uses DHCP.
Internet Protocol (IPv4) address of the phone.
Subnet mask that the phone uses.
Default router used that the phone uses.
Primary Domain Name System (DNS) server (DNS Server 1) and optional backup
DNS servers (DNS Server 2 and 3) that the phone uses.
Indicates whether the phone is using an alternative TFTP server.
Primary Trivial File Transfer Protocol (TFTP) server used that the phone uses.
Backup Trivial File Transfer Protocol (TFTP) server used that the phone uses.
Access Web Page for