Cisco Ip Phone 8800 Series Administration Guide For Cisco Unified Communications Manager - Cisco 8800 Series Administration Manual

Access Key Expansion Module Setup
If the label is longer than the display space in both one- and two-column mode, the text contains an ellipsis
Note
(...) .
Procedure
Step 1 In Cisco Unified Communications Manager Administration, choose Device > Phone.
The Find and List Phones window appears. You can search for one or more phones that you want to configure
for the Cisco IP Phone 8800 Key Expansion Module.
Step 2 Select and enter your search criteria and click Find.
The Find and List Phones window appears with a list of phones that match your search criteria.
Step 3 Click the phone that you want to configure for the Cisco IP Phone 8800 Key Expansion Module. The Phone
Configuration window appears.
Step 4 Scroll down to the Expansion Module Information section on the right pane of the Phone Configuration
window, and choose the appropriate expansion module (or "none") for the Module 1, Module 2 and Module
3 fields, in that order.
For the number of supported KEMs per phone model, see
Overview, on page
Step 5 Be sure to select the phone button template (in the Device Information portion of the Phone Configuration
window) that is configured to make full use of the KEMs attached to the phone.
Step 6 Depending on your requirements, enable the One Column Display for KEM field for one-column mode, or
disable the field for two-column mode.
Step 7
Click Save.
Access Key Expansion Module Setup
After you install one or more key expansion modules on the phone and configure them in Cisco Unified
Communications Manager Administration, the phone automatically recognizes the key expansion modules.
When multiple key expansion modules are attached, they are numbered according to the order in which they
connect to the phone:
• Key expansion module 1 is the KEM closest to the phone.
• Key expansion module 2 is the KEM in the middle.
• Key expansion module 3 is the KEM farthest to the right.
You can select a key expansion module, and then choose one of the following softkeys:
• Exit: Returns to the Applications menu.
• Details: Provides details about the selected key expansion module.
• Setup: Allows you to configure the brightness of the selected key expansion module. Setting the brightness

Cisco IP Phone 8800 Series Administration Guide for Cisco Unified Communications Manager

106
93.
can also be done using the Preferences menu on the phone.
Cisco IP Phone Key Expansion Module Setup