Cisco Ip Phone 8800 Series Administration Guide For Cisco Unified Communications Manager - Cisco 8800 Series Administration Manual

Phone Feature Configuration
Step 4 Check Enable and click Save.
Note
Step 5
In the Service Parameter Information window, click New Parameter and enter the following information in
their respective fields:
• Parameter Name. Enter voicemail_server.
• Parameter Display Name. Enter voicemail_server.
• Default Value. Enter the hostname of the primary Unity Server.
• Parameter Description
Step 6 Check Parameter is Required and click Save.
Note
Step 7
Close the window and select Save again in the Phone Service Configuration window.
Set Up Visual Voicemail for a Specific User
Use the following procedure to configure Visual Voicemail for a specific user.
Note For configuration information, see the Cisco Visual Voice Mail documentation at
c/en/us/support/unified-communications/visual-voicemail/model.html.
Procedure
Step 1 In Cisco Unified Communications Manager Administration, choose Device > Phone.
Step 2 Select the device associated to the user you are searching for.
Step 3
In the Related Links drop-down, choose Subscribe/Unsubscribe Services and click Go.
Step 4 Select the VisualVoiceMail Service you created, then choose Next > Subscribe.
Visual Voicemail Setup for a User Group
To add a batch of Cisco IP phones to Cisco Unified Communications Manager with Visual Voicemail
subscribed, create a phone template in BAT tool for each phone type and in each phone template. You can
then subscribe to the Visual Voicemail service, and use the template to insert the phones.
For more information, see
model.html.

Cisco IP Phone 8800 Series Administration Guide for Cisco Unified Communications Manager

232
Ensure that you do not check Enterprise
Subscription.
Ensure that you do not check Parameter is a Password (mask contents).
http://www.cisco.com/c/en/us/support/unified-communications/visual-voicemail/
http://www.cisco.com/