Cisco Ip Phone 8800 Series Administration Guide For Cisco Unified Communications Manager - Cisco 8800 Series Administration Manual

Procedure
Step 1
Press Applications
Step 2 Select Admin settings > Network setup > Wi-Fi client setup.
Step 3
Set up the wireless configuration as described in the following table.
Table 10: WiFi Client Setup Menu Options
Option
Wireless
Wireless sign in
Access
IPv4 setup
IPv6 setup
MAC address
.
Description
Turns the wireless radio on the Cisco IP
Phone on or off.
Enables the display of the Wireless Sign in
Access window in the main Applications
menu.
In the IPv4 Setup configuration submenu,
you can do the following:
• Enable or disable the phone to use the
IP address that the DHCP server
assigns.
• Manually set the IP Address, Subnet
Mask, Default Routers, DNS Server,
and Alternate TFTP servers.
For more information about the IPv4 address
fields, see Set Up IPv4, on page
In the IPv6 setup configuration submenu,
you can do the following:
• Enable or disable the phone to use the
IPv6 address that is either assigned by
DHCPv6 server or acquired by SLAAC
through an IPv6-enabled router.
• Manually set the IPv6 Address, Prefix
Length, Default Routers, DNS Server,
and Alternate TFTP servers.
For more information about the IPv6 address
fields, see Set Up IPv6, on page
Unique Media Access Control (MAC)
address of the phone.

Cisco IP Phone 8800 Series Administration Guide for Cisco Unified Communications Manager

To change
See Set Wireless Field, on page
See Set WLAN Sign In Access Field,
on page 60.
Scroll to IPv4 setup and press Select.
53.
Scroll to IPv6 setup and press Select.
56.
Display only. Cannot configure.
Set up Wireless LAN
60.
45