Cisco Ip Phone 8800 Series Administration Guide For Cisco Unified Communications Manager - Cisco 8800 Series Administration Manual

Table 37: Ethernet Statistics Information
Item
Rx Frames
Tx Frames
Rx Broadcasts
Restart Cause
Elapsed Time
Port 1
Port 2

Cisco IP Phone 8800 Series Administration Guide for Cisco Unified Communications Manager

Description
Number of packets that the phone received.
Number of packets that the phone sent.
Number of broadcast packets that the phone received.
Cause of the last reset of the phone. Specifies one of the following values:
• Initialized
• TCP-timeout
• CM-closed-TCP
• TCP-Bad-ACK
• CM-reset-TCP
• CM-aborted-TCP
• CM-NAKed
• KeepaliveTO
• Failback
• Phone-Keypad
• Phone-Re-IP
• Reset-Reset
• Reset-Restart
• Phone-Reg-Rej
• Load Rejected HC
• CM-ICMP-Unreach
• Phone-Abort
Amount of time that has elapsed since the phone last rebooted.
Link state and connection of the Network port. For example, Auto 100
Mb Full-Duplex means that the Network port is in a link-up state and has
autonegotiated a full-duplex, 100-Mbps connection.
Link state and connection of the PC port.
Cisco IP Phone Status
261