Cisco Ip Phone 8800 Series Administration Guide For Cisco Unified Communications Manager - Cisco 8800 Series Administration Manual

d) Secure the phone bracket to the IP phone with the machine screws.
e) Thread the handset cord (and headset cord, if using one). Reattach the cords and seat them in the clips that
are incorporated into the phone body.
Figure 13: Attach Phone Bracket
Step 3 Attach the Ethernet cable to the 10/100/1000 SW network port and wall jack.
If you are connecting a network device (such as a computer) to the phone, attach the cable to the
10/100/1000 Computer (PC access) port.

Cisco IP Phone 8800 Series Administration Guide for Cisco Unified Communications Manager

Lockable Wall Mount Components for Phone
125