Enable Bluetooth Wireless Headset - Cisco 8800 Series Administration Manual

Cisco IP Phone 8811, 8841, 8851NR, and 8865NR do not support Bluetooth wireless headsets. These hands-free
features apply to Bluetooth wireless headsets that are used with the Cisco IP Phone 8845, 8851, 8861 and
8865:
• Answer a call
• End a call
• Change the headset volume for a call
• Redial
• Caller ID
• Divert
• Hold and Accept
• Release and Accept
Hands-free devices have different feature activation methods. Device manufacturers may also use different
terms when referring to the same feature.
Important Only one headset type works at any given time. If you use both a Bluetooth headset and an analog headset
that are attached to the phone, enabling the Bluetooth headset disables the analog headset. To enable the
analog headset, disable the Bluetooth headset. Plugging a USB headset into a phone that has Bluetooth
headset enabled disables both the Bluetooth and analog headset. If you unplug the USB headset, you can
either enable the Bluetooth headset or disable the Bluetooth headset to use the analog headset.
For information about how to use your Bluetooth wireless headset, see:
• Cisco IP Phone 8800 Series User Guide
• User Guides provided with your headset

Enable Bluetooth Wireless Headset

Before users can use a Bluetooth Wireless headset, you must enable it.
Procedure
Step 1 In Cisco Unified Communications Manager Administration, choose Device > Phone.
Step 2
Locate the phone you want to modify, and go to the Phone Configuration window for that phone.
Step 3 In the Phone Configuration window, select Enable for the Bluetooth setting and Handsfree for the Bluetooth
Profiles setting.
Step 4 Save your changes.
Cisco IP Phone 8800 Series Administration Guide for Cisco Unified Communications Manager
Headsets
91