Display Current Access Point Window - Cisco 8800 Series Administration Manual

Item
Receiver lost packets
Voice-Quality Metrics
Cumulative conceal ratio
Interval conceal ratio
Max conceal ratio
Conceal seconds
Severely conceal seconds
Latency

Display Current Access Point Window

The Current Access Point screen displays statistics about the access point that the Cisco IP Phone 8861 uses
for wireless communications.
Procedure
Step 1
Press Applications
Step 2 Select Admin settings > Status > Current Access Point.
Step 3 To exit the Current Access Point screen, press Exit.
Current Access Points Fields
The following table describes the fields in the Current Access Point screen.
Table 42: Current Access Point Items
Item
AP name
MAC address
Description
Missing RTP packets (lost in transit).
Total number of concealment frames divided by total number of speech
frames that were received from start of the voice stream.
Ratio of concealment frames to speech frames in preceding 3-second interval
of active speech. If using voice activity detection (VAD), a longer interval
might be required to accumulate 3 seconds of active speech.
Highest interval concealment ratio from start of the voice stream.
Number of seconds that have concealment events (lost frames) from the start
of the voice stream (includes severely concealed seconds).
Number of seconds that have more than 5 percent concealment events (lost
frames) from the start of the voice stream.
Estimate of the network latency, expressed in milliseconds. Represents a
running average of the round-trip delay, measured when RTCP receiver report
blocks are received.
.
Description
Name of the AP, if it is CCX-compliant; otherwise, the MAC address displays here.
MAC address of the AP.
Cisco IP Phone 8800 Series Administration Guide for Cisco Unified Communications Manager
Cisco IP Phone Status
267