Cisco Ip Phone 8800 Series Administration Guide For Cisco Unified Communications Manager - Cisco 8800 Series Administration Manual

Cisco IP Phone Status
Item
DHCP state (IPv4 / IPv6)
The following tables describe the messages that appear for DHCPv4 and DHCPv6 states.
Table 38: DHCPv4 ethernet statistics messages
DHCPv4 state
CDP INIT
DHCP BOUND
DHCP DISABLED
DHCP INIT
DHCP INVALID
DHCP RENEWING
DHCP REBINDING
DHCP REBOOT
DHCP REQUESTING
DHCP RESYNC
DHCP WAITING COLDBOOT TIMEOUT
DHCP UNRECOGNIZED
DISABLED DUPLICATE IP
DHCP TIMEOUT
IPV4 STACK TURNED OFF
ILLEGAL IPV4 STATE

Cisco IP Phone 8800 Series Administration Guide for Cisco Unified Communications Manager

262
Description
• In IPv4-mode, displays only the DHCPv4 state, such as DHCP
BOUND.
• In IPv6-mode, displays only the DHCPv6 state, such as ROUTER
ADVERTISE., (GOOD IP).
• In dual-stack mode, both DHCPv4 and DHCPv6 state information
is displayed.
Description
CDP is not bound or WLAN is not in service
DHCPv4 is BOUND
DHCPv4 is disabled
DHCPv4 is INIT
DHCPv4 is INVALID; this is initial state
DHCPv4 is RENEWING
DHCPv4 is REBINDING
DHCPv4 is init-reboot
DHCPv4 is requesting
DHCPv4 is RESYNCH
DHCPv4 is booting
Unrecognized DHCPv4 state
Duplicated IPv4 Address
DHCPv4 Timeout
Phone is in IPv6-only mode with IPv4 Stack turned
off
Illegal IPv4 state and should not happen