Verify The Network Setup - Cisco 8851 Administration Manual

Cisco IP Phone Installation
•
•
•
•
•
•
•
•
•
•
•
•
•
•

Verify the Network Setup

For the phone to operate successfully as an endpoint in your network, your network must meet specific
requirements.
Procedure
Step 1 Configure a VoIP Network to meet the following requirements:
• VoIP is configured on your Cisco routers and gateways.
Step 2 Set up the network to support one of the following:
Verify the Network Setup, page 33
Install the Cisco IP Phone, page 34
Configure the Network from the Phone, page 35
Set Up Wireless LAN from the Phone, page 41
Verify Phone Startup, page 43
Video Transmit Resolution Setup, page 43
Configure the Voice Codecs, page 44
Configure the Video Codec, page 45
Set the Optional Network Servers, page 45
VLAN Settings, page 46
SIP and NAT Configuration, page 53
Dial Plan, page 63
Regional Parameters and Supplementary Services, page 70
Cisco IP Phone 8800 Series Documentation, page 74
C H A P T E R
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
4
33