Enable Wideband Codec On Analog Headsets - Cisco 8800 Series Administration Manual

Procedure
Step 1
On the Cisco IP Phone, press Applications
Step 2 Select Accessories.
Step 3
Highlight the analog headset, then press Setup.
Step 4 Press On to turn on the wideband and press Off to turn off the wideband.

Enable Wideband Codec on Analog Headsets

Although analog headsets are supported on the phone, the phones cannot detect when an analog headset is
plugged in. For this reason, by default, the analog headset displays in the Accessories window on the phone
screen.
Displaying the analog headset as the default allows users to enable wideband for the analog headset.
If the screen doesn't display On or Off softkey, follow these steps to ensure that the user can enable wideband
codec on an analog headset:
Procedure
Step 1
In Cisco Unified Communications Manager Administration, choose Device > Phone.
Step 2 In the Find and List Phones window, enter the search criteria for the phone to which you want to add the
analog headset, then click Find.
Step 3
Click on the Device Name that you want. The Phone Configuration window displays.
Step 4 On the Product Specific Configuration Layout portion of the Phone Configuration window, ensure that the
Wideband Headset UI Control option is enabled. (This option is enabled by default.)
Step 5
In the Product Specific Configuration Layout portion of the Phone Configuration window, you can also set
the Wideband Headset option. (This option is also enabled by default).
Wired Headsets
You can use the wired headset with all of the features on the Cisco IP Phone, including the Volume and Mute
buttons. Use these buttons to adjust the earpiece volume and to mute the speech path from the headset
microphone.
Connect Wired Headset
To connect a wired headset to the Cisco IP Phone, perform these steps:
Cisco IP Phone 8800 Series Administration Guide for Cisco Unified Communications Manager
.
Headsets
87