Cisco Ip Phone 8800 Series Administration Guide For Cisco Unified Communications Manager - Cisco 8800 Series Administration Manual

The following figure shows how you attach the phone to the wall bracket.
Figure 8: Attach Phone to Wall Bracket
Step 5 Press the phone firmly into the wall bracket and slide the phone down. The tabs in the bracket click into
position.
Step 6
Proceed to
Remove the Phone from the Non-Lockable Wall Mount
The wall bracket has two tabs that lock the kit together. Use the following illustration to locate the tabs.
Figure 9: Tab Location
Adjust the Handset Rest, on page

Cisco IP Phone 8800 Series Administration Guide for Cisco Unified Communications Manager

Non-Lockable Wall Mount Components
127.
115