Wall Mount Options - Cisco 8800 Series Administration Manual

Wall Mounts
•
•
•
•
•

Wall Mount Options

The following wall mount options are available:
• Cisco IP Phone 8800 Series Wall Mount Kit: A nonlockable wall mount kit available for the Cisco IP
• Wallmount Kit for Cisco IP Phone 8800 Video Series: A lockable wall mount kit installed on the Cisco
• Cisco IP Phone 8800 Series Wall Mount Kit with Single KEM: The kit is installed on the Cisco IP Phone
Non-Lockable Wall Mount Components
This section describes how to install the Cisco IP Phone 8800 Series Wall Mount Kit.
Wall Mount Options, page 109
Non-Lockable Wall Mount Components, page 109
Non-Lockable Wall Mount Components for Phone with Key Expansion Module, page 116
Lockable Wall Mount Components for Phone, page 122
Adjust the Handset Rest, page 127
Phone 8800 Series. This wall kit applies to Cisco IP Phone 8811, 8841, 8851, 8851NR, and 8861. The
PID is CP-8800-WMK=.
IP Phone 8845, 8865, and 8865NR. The PID is CP-8800-VID-WMK=.
8851, 8851NR, and 8861 with one attached Cisco IP Phone 8800 Key Expansion Module. The PID is
CP-8800-BEKEM-WMK=
Cisco IP Phone 8800 Series Administration Guide for Cisco Unified Communications Manager
9
C H A P T E R
109