Cisco Ip Phone 8800 Series Administration Guide For Cisco Unified Communications Manager - Cisco 8800 Series Administration Manual

Cisco IP Phone Web Page
Item
LLDP-MED:PC Port
LLDP Power Priority
LLDP Asset ID
CTL file
ITL file
ITL signature
CAPF server
TVS
TFTP server
TFTP server
Automatic port
synchronization
Switch port remote
configuration
PC port remote
configuration
IP addressing mode
IP preference mode
control

Cisco IP Phone 8800 Series Administration Guide for Cisco Unified Communications Manager

276
Description
Indicates whether LLDP-MED is enabled on the PC port.
Phone power priority to the switch, thus enabling the switch to appropriately provide
power to the phones. Settings include:
• Unknown: This is the default value.
• Low
• High
• Critical
Asset ID that is assigned to the phone for inventory management.
MD5 hash of the CTL file.
The ITL file contains the initial trust list.
MD5 hash of the ITL file
CPF server in use
The main component of Security by Default. Trust Verification Services (TVS)
enables Cisco Unified IP Phones to authenticate application servers, such as EM
services, directory, and MIDlet, during HTTPS establishment.
The name of the TFTP Server used by the phone.
The name of the TFTP Server used by the phone.
Indicates if the phone automatically synchronizes port speed to eliminate packet loss.
Indicates if the SW port is remotely controlled.
Indicates if the PC port is remotely controlled.
Identifies the addressing mode:
• IPv4 Only
• IPv4 and IPv6
• IPv6 Only
Indicates the IP address version that the phone uses during signaling with Cisco
Unified Communications Manager when both IPv4 and IPv6 are both available on
the phone.