Digital Operator Components - YASKAWA CIMR-MC5A20P4 Instruction Manual

1.2.2 Digital Operator Components

This section describes the component names and functions of the Digital Operator. The component names
and functions are shown in Figure 1.4 and key functions are described in Table 1.4.
DRIVE FWD REV
Frequency Ref
U1- -01 = 00.00 HZ
DIGITAL OPERATOR
JVOP-130
LOCAL
REMOTE
JOG
FWD
REV
RUN
Fig
REMOTE
SEQ REF
MENU ESC
DATA
ENTER
RESET
STOP
1.4 Digital Operator Component Names and Functions
- 7
Operation Mode Indicators
DRIVE: Lit when in operation mode.
FWD: Lit when there is a forward reference input.
REV: Lit when there is a reverse reference input.
SEQ: Lit when an operation reference from the
control circuit terminal is enabled.
REF: Lit when the frequency reference from con-
trol circuit terminals 13 and 14 is enabled.
Data Display
Two-line LCD that displays data for monitoring,
user constants, and set values with 16 characters
per line.
Keys
Execute operations such as setting user constants,
monitoring, jogging, and autotuning.
1.2 Nomenclature
1