Drive Programming Tools; Language Support - Allen-Bradley PowerFlex 525 User Manual

Drive Programming Tools

Language Support

Step
10. If desired, press Sel to move from digit to digit
or bit to bit. The digit or bit that you can change
will flash.
11. Press Esc to cancel a change and exit Program
Mode.
Or
Press Enter to save a change and exit Program
Mode.
The digit will stop flashing and the word
Program on the LCD display will turn off.
12. Press Esc to return to the parameter list.
Continue to press Esc to back out of the
programming menu.
If pressing Esc does not change the display, then
b001 [Output Freq] is displayed. Press Enter or
Sel to enter the group list again.
Some features in the PowerFlex 525 drive are not supported by older
configuration software tools. It is strongly recommended that customers using
such tools migrate to RSLogix 5000 (version 17.0 or greater) or Logix Designer
(version 21.0 or greater) with Add-On-Profile (AOP), or Connected
Components Workbench (version 3.0 or greater) to enjoy a richer, full-featured
configuration experience.
Description
Connected Components Workbench
Logix Designer
RSLogix 5000
Built-in USB software tool
Serial Converter Module
USB Converter Module
Remote Panel Mount, LCD Display
(2)
Remote Handheld, LCD Display
(1) Available as a free download at http://ab.rockwellautomation.com/programmable-controllers/connected-components-
workbench-software.
(2) Does not support the new dynamic parameter groups (AppView, CustomView), and CopyCat functionality is limited to the linear
parameter list. Communications option cards are not accessible using the remote HIM.
Language HIM/LCD Display
English Y
French Y
Spanish Y
Italian Y
German Y
Japanese –
Portuguese Y
Chinese Simplified –
Korean –
Rockwell Automation Publication 520-UM001A-EN-E - February 2013
Key(s)
Sel
or
Esc
Esc
Catalog Number/Release Version
(1)
Version 3.0 or greater
Version 21.0 or greater
Version 17.0 or greater
–
22-SCM-232
1203-USB
(2)
22-HIM-C2S
22-HIM-A3
RSLogix 5000
(Version 17.0 or greater) /
Logix Designer
(Version 21.0 or greater)
Y
Y
Y
Y
Y
Y
Y
Y
Y
Start Up Chapter 2
Example Display
VOLTS
FWD
PROGRAM
VOLTS
FWD
or
VOLTS
FWD
FWD
Connected Components
Workbench
(Version 3.0 or greater)
Y
Y
Y
Y
Y
–
–
Y
–
51