Manual Conventions - Allen-Bradley PowerFlex 525 User Manual

Preface Overview

Manual Conventions

8
The following publications provide specific Network Communications
information:
Title
PowerFlex 525 Embedded EtherNet/IP Adapter (including dual port Ethernet)
PowerFlex 525 DeviceNet Adapter
PowerFlex 525 PROFIBUS DP Adapter
• In this manual we refer to PowerFlex 520-Series Adjustable Frequency AC
Drive as; drive, PowerFlex 520, PowerFlex 520 Drive or PowerFlex 520 AC
drive.
• Specific drives within the PowerFlex 520-Series may be referred to as:
– PowerFlex 525, PowerFlex 525 drive or PowerFlex 525 AC drive.
• Parameter numbers and names are shown in this format:
P 031 [Motor NP Volts]
• The following words are used throughout the manual to describe an
action:
Words
Can
Cannot
May
Must
Shall
Should
Should Not
• The Studio 5000™ Engineering and Design Environment combines
engineering and design elements into a common environment. The first
element in the Studio 5000 environment is the Logix Designer
application. The Logix Designer application is the rebranding of
RSLogix 5000 software and will continue to be the product to program
Logix 5000 controllers for discrete, process, batch, motion, safety, and
drive-based solutions. The Studio 5000 environment is the foundation for
the future of Rockwell Automation engineering design tools and
capabilities. It is the one place for design engineers to develop all the
elements of their control system.
Rockwell Automation Publication 520-UM001A-EN-E - February 2013
Name
Number
Group
b = Basic Display
P = Basic Program
t = Terminal Blocks
C = Communications
L = Logic
d = Advanced Display
A = Advanced Program
M = Modified
N = Network
G = AppView and CustomView
F = Fault and Diagnostic
Meaning
Possible, able to do something
Not possible, not able to do something
Permitted, allowed
Unavoidable, you must do this
Required and necessary
Recommended
Not Recommended
Publication
520COM-UM001
520COM-UM002
520COM-UM003