Allen-Bradley PowerFlex 525 User Manual page 121

F682 [Comm Sts - Opt]
Displays the status of the internal communication to the drive.
1 = Condition True, 0 = Condition False
Rx
Tx
Status
Error
Not Used
Values Default:
Min/Max:
Display:
F683 [Com Sts-Emb Enet]
Displays the status of the embedded EtherNet/IP interface to the drive.
1 = Condition True, 0 = Condition False
Rx
Tx
Status
Error
Not Used
Values Default:
Min/Max:
Display:
F684 [EN Addr Src]
Displays the network configuration source currently used by the embedded EtherNet/IP interface.
Options 1 "Parameters"
2 "BOOTP"
F685 [EN Rate Act]
Displays the network data rate currently used by the embedded EtherNet/IP interface.
Options 0 "No Link"
1 "10Mbps Full"
2 "10Mbps Half"
3 "100Mbps Full"
4 "100Mbps Half"
5 "Dup IP Addr"
6 "Disabled"
Fault and Diagnostic Group (continued)
Digit 3 = "Internal Com option"
0 "Not Active (no connection)"
Digit 1
1 "Internal option connected/active"
Digit 2
2...8 "Reserved"
Digit 3
9 "Internal com option faulted"
Digit 4
Read Only
0000/1911
0000
Digit 3 = "Embedded EtherNet/IP"
0 "Not Active (no connection)"
Digit 1
1 "Embedded EtherNet/IP active"
Digit 2 2-8 "Reserved"
Digit 3
9 "Embedded EtherNet/IP faulted"
Digit 4
Read Only
0000/1911
0000
Read Only
Read Only
Rockwell Automation Publication 520-UM001A-EN-E - February 2013
Programming and Parameters Chapter 3
121