Allen-Bradley PowerFlex 525 User Manual page 96

Chapter 3 Programming and Parameters
d382 [Torque Current]
Displays the current value of the motor torque current measured by the drive.
Values Default:
Min/Max:
Display:
d383 [PID1 Fdbk Displ]
d385 [PID2 Fdbk Displ]
Displays the active PID Feedback value.
Values Default:
Min/Max:
Display:
d384 [PID1 Setpnt Displ]
d386 [PID2 Setpnt Displ]
Displays the active PID Setpoint value.
Values Default:
Min/Max:
Display:
d387 [Position Status]
Displays the present operating condition of the drive. When in Positioning mode, Bit 1 indicates positive or negative position in relation to Home.
1 = Condition True, 0 = Condition False
Dir Positive
At Position
At Home
Drive Homed
Not Used
Values Default:
Min/Max:
Display:
d388 [Units Traveled H]
Stop drive before changing this parameter.
32
32 bit parameter
Displays the number of user-defined units traveled from the home position. See
Values Default:
Min/Max:
Display:
d389 [Units Traveled L]
Stop drive before changing this parameter.
Displays the number of user-defined units traveled from the home position. See
Values Default:
Min/Max:
Display:
96
Advanced Display Group (continued)
Read Only
0.00/(Drive Rated Amps x 2)
0.01 A
Read Only
0.0/100.0%
0.1%
Read Only
0.0/100.0%
0.1%
Digit 1
Digit 2
Digit 3
Digit 4
Read Only
0000/1111
0000
d387 [Position Status] for direction of travel.
Read Only
0/64000
1
d387 [Position Status] for direction of travel.
Read Only
0.00/0.99
0.01
Rockwell Automation Publication 520-UM001A-EN-E - February 2013
Related Parameter(s): d387
Related Parameter(s): d387