Allen-Bradley PowerFlex 525 User Manual page 106

Chapter 3 Programming and Parameters
A466 [PID 1 Preload]
A478 [PID 2 Preload]
Sets the value used to preload the integral component on start or enable.
Values Default:
Min/Max:
Display:
A467 [PID 1 Invert Err]
A479 [PID 2 Invert Err]
Changes the sign of the PID error.
Options 0 "Normal" (Default)
1 "Inverted"
A481 [Process Disp Lo]
Sets the value displayed in b010 [Process Display] when the drive is running at
Values Default:
Min/Max:
Display:
A482 [Process Disp Hi]
Sets the value displayed in b010 [Process Display] when the drive is running at
Values Default:
Min/Max:
Display:
A483 [Testpoint Sel]
Used by Rockwell Automation field service personnel.
Values Default:
Min/Max:
Display:
A484 [Current Limit 1]
Maximum output current allowed before current limiting occurs.
Values Default:
Min/Max:
Display:
A485 [Current Limit 2]
Maximum output current allowed before current limiting occurs.
Values Default:
Min/Max:
Display:
106
Advanced Program Group (continued)
0.0 Hz
0.0/500.0 Hz
0.1 Hz
P043 [Minimum Freq].
0.00
0.00/99.99
0.01
P044 [Maximum Freq].
0.00
0.00/99.99
0.01
400
0/FFFF
1
Drive Rated Amps x 1.5
0.0/(Drive Rated Amps x 1.8)
0.1 A
Drive Rated Amps x 1.1
0.0/(Drive Rated Amps x 1.8)
0.1 A
Rockwell Automation Publication 520-UM001A-EN-E - February 2013
Related Parameter(s): b010, P043
Related Parameter(s): b010, P044
Related Parameter(s): P033
Related Parameter(s): P033