Allen-Bradley PowerFlex 525 User Manual page 122

Chapter 3 Programming and Parameters
F686 [DSI I/O Act]
Displays the Drives that are active in Multi-Drive mode.
Drive 0 Actv
Drive 1 Actv
Drive 2 Actv
Drive 3 Actv
Drive 4 Actv
Value Default:
Min/Max:
Display:
F687 [HW Addr 1]
F688 [HW Addr 2]
F689 [HW Addr 3]
F690 [HW Addr 4]
F691 [HW Addr 5]
F692 [HW Addr 6]
Shows the MAC address for the embedded EtherNet/IP interface.
Values Default:
Min/Max:
Display:
F693 [EN IP Addr Act 1]
F694 [EN IP Addr Act 2]
F695 [EN IP Addr Act 3]
F696 [EN IP Addr Act 4]
Shows the actual IP address used by the embedded EtherNet/IP interface at the time. This indicates 0 if no address is set.
255.255.255.255
[EN IP Addr Act 1]
[EN IP Addr Act 2]
[EN IP Addr Act 3]
[EN IP Addr Act 4]
Values Default:
Min/Max:
Display:
122
Fault and Diagnostic Group (continued)
1 = Drive Inactive, 0 = Drive Active
Digit 1
Digit 2
Digit 3
Digit 4
Digit 5
Read Only
00000/11111
00000
Read Only
0/255
1
Read Only
0/255
1
Rockwell Automation Publication 520-UM001A-EN-E - February 2013