Network Parameter Group; Modified Parameter Group - Allen-Bradley PowerFlex 525 User Manual

Chapter 3 Programming and Parameters
A570 [P Jump]
Sets the frequency amplitude that is added to or subtracted from the commanded frequency. See the diagram at
Values Default:
Min/Max:
Display:
A571 [Sync Time]
Enables the function that holds the drive at the current frequency even if the commanded frequency changes. Used with t062, t063,
[Sync Time]
Speed Sync Bit
Change Ref's
Time
Values Default:
Min/Max:
Display:
A572 [Speed Ratio]
Stop drive before changing this parameter.
Scales the drive speed command.
Values Default:
Min/Max:
Display:

Network Parameter Group

Modified Parameter Group

118
Advanced Program Group (continued)
0.00 Hz
0.00/300.00 Hz
0.01 Hz
New Drive #2 Reference
New Drive #1 Reference
[Fiber Status]
Drive #1 and #2 Sync Enable Input
0.0 s
0.0/3200.0 s
0.1 s
1.00
0.01/99.99
0.01
This group contains parameters for the network option card that is installed.
Refer to the network option card's user manual for more information on the
available parameters.
This group contains parameters that have their values changed from the factory
default.
When a parameter has its default value changed, it is automatically added to this
group. When a parameter has its value changed back to the factory default, it is
automatically removed from this group.
Rockwell Automation Publication 520-UM001A-EN-E - February 2013
A567 [Max Traverse].
Related Parameter(s): t062, t063,
t065-t068 [DigIn TermBlk xx] 32 "Sync Enable".
Related Parameter(s): A567
t065 - t068, A560