Advanced Display Group - Allen-Bradley PowerFlex 525 User Manual

Chapter 3 Programming and Parameters

Advanced Display Group

d360 [Analog In 0-10V]
Displays the 0-10V analog input as a percent of full scale.
Values Default:
Min/Max:
Display:
d361 [Analog In 4-20mA]
Displays the 4-20 mA analog input as a percent of full scale.
Values Default:
Min/Max:
Display:
d362 [Elapsed Time-hr]
Displays the total elapsed powered-up time (in hours) since timer reset. The timer stops when it reaches the maximum value.
Values Default:
Min/Max:
Display:
d363 [Elapsed Time-min]
Displays the total elapsed powered-up time (in minutes) since timer reset. Resets to zero when maximum value is reached and increments
Values Default:
Min/Max:
Display:
d364 [Counter Status]
Displays the current value of the counter if enabled.
Values Default:
Min/Max:
Display:
d365 [Timer Status]
32
32 bit parameter.
Displays the current value of the timer if enabled.
Values Default:
Min/Max:
Display:
d367 [Drive Type]
Used by Rockwell Automation field service personnel.
Values Default:
Min/Max:
Display:
94
Read Only
0.0/100.0%
0.1%
Read Only
0.0/100.0%
0.1%
Read Only
0/32767 hr
1 hr
Read Only
0.0/60.0 min
0.1 min
Read Only
0/65535
1
Read Only
0/9999 s
1 s
Read Only
0/65535
1
Rockwell Automation Publication 520-UM001A-EN-E - February 2013
Related Parameter(s): t091,
Related Parameter(s): t095,
Related Parameter(s): A555
Related Parameter(s): d362, A555
d362 [Elapsed Time-hr] by one.
t092
t096