Display And Control Keys - Allen-Bradley PowerFlex 525 User Manual

Display and Control Keys

FWD
ENET LINK
EtherNet/IP
Esc
Sel
Control and Navigation Keys
Display
ENET
LINK
LED
FAULT
Key
Esc
Sel
Rockwell Automation Publication 520-UM001A-EN-E - February 2013
Menu Parameter Group and Description
Basic Display
Commonly viewed drive operating conditions.
Basic Program
Commonly used programmable functions.
Terminal Blocks
Programmable terminal functions.
Communications
Programmable communication functions.
Logic
Programmable logic functions.
Advanced Display
Advanced drive operating conditions.
Advanced Program
Remaining programmable functions.
Fault and Diagnostic
Consists of list of codes for specific fault conditions.
Network
Network functions that are shown only when a comm
card is used.
Modified
Functions from the other groups with values changed
from default.
AppView and CustomView
Functions from the other groups organized for specific
applications.
Display State Description
Off Adapter is not connected to the network.
Steady Adapter is connected to the network and drive is controlled
through Ethernet.
Flashing Adapter is connected to the network but drive is not controlled
through Ethernet.
Off Adapter is not connected to the network.
Steady Adapter is connected to the network but not transmitting data.
Flashing Adapter is connected to the network and transmitting data.
LED State Description
Flashing Red Indicates drive is faulted.
Name Description
Up Arrow Scroll through user-selectable display parameters or groups.
Down Arrow Increment values.
Escape Back one step in programming menu.
Cancel a change to a parameter value and exit Program Mode.
Select Advance one step in programming menu.
Select a digit when viewing parameter value.
Enter Advance one step in programming menu.
Save a change to a parameter value.
Start Up Chapter 2
49