How To Use Event Input; Input Assignments - Omron e5ck User Manual

4.7 How to Use Event Input

JInput
assignments
• When using event input, add on the input unit (E53-CKB)
• Switching by event input is not possible on the menu display.
• Switch event inputs ON and OFF while controller power is ON.
• You can choose from the following five event input functions:
Run/Reset
Auto/Manual
Hold/Hold cancel
Advance
Pattern select
• Event input ON/OFF judgment is carried out on inputs of 200 ms mini
mum.
• When event inputs are used as program advance input, the program step
is advanced at the rising (OFF
event inputs are used as run/reset input, program operation is stopped
(reset) at the rising (OFF
operation is started (run) at the falling (ON
are accepted at all times.
• Set event input assignments in the event input assignment 1" parame
ter (option mode).
• The following table shows the relationship between the settings and
functions of the event input assignment 1" parameter.
Setting
Event input disabled
OFF³ON: Reset /ON³OFF: Run
ON: Manual
ON: Hold
Execute at OFF³ON
OFF : pattern 0 / ON: pattern 1 (*1)
OFF: pattern 0 / ON: pattern 2 (*2)
*1 Enabled when the "number of patterns" parameter is set to "2" or more
*2 Enabled when the "number of patterns" parameter is set to "3" or more

4.7 How to Use Event Input

ON) edge of the input signal. When
³
ON) edge of the input signal, and program
³
OFF) edge. Other signals
³
Function
/OFF: Auto
/OFF: Hold cancel
4–17