CHAPTER 3 BASIC OPERATION
Setting Example
1 second min.
3–12
Alarm 2 is output when the temperature exceeds alarm value 2 pro
grammed to the SP . Parameter factory settings for alarm type 2," alarm
hysteresis" and close in alarm/open in alarm" are used.
In this example, the related parameters are set as follows:
alarm type 2" = 2: upper limit"
alarm value 2"
= (set in program setting)
alarm hysteresis: = 0.02"
close in alarm/open in alarm"
In this example, let's check the alarm type.
(1) Select the menu display, and select
or
keys. For details on selecting the menu display, see page
1 9.
(2) Press the
key to enter the setup mode. The top parameter in the
setup mode
(3) Press the
key until [
played. Default is 2: upper limit".
=
: close in alarm"
: setup mode" pressing the
: input type" is displayed.
] (alarm type 2" parameter) is dis