Level 1 Mode - Omron e5ck User Manual

• The parameters in this mode can be used only when the security" parameter (pro
tect mode) is set to 0" to 3".
• This mode contains the main parameters for adjusting control, such as executing AT
(auto tuning), setting the control period, setting PID parameters.
• To select this mode, press the
to the menu display. If you select [
mum, the controller enters the level 1 mode.
• To select parameters in this mode, press the
use the or keys.
• The following table shows the parameters supported in this mode and the page where
the parameter is described.
Symbol
AT Execute/Cancel
Proportional band
Integral time
Derivative time
Cooling coefficient
Dead band
Manual reset value
Hysteresis (heat)
Hysteresis (cool)
Control period (heat)
Control period (cool)
key for 1 second minimum. The display changes
] then press the
key. To change parameter settings,
Parameter Name

Level 1 Mode

key for 1 second mini
Page
5-18
5-18
5-18
5-18
5-19
5-19
5-20
5-21
5-21
5-22
5-22
5–17