Omron e5ck User Manual page 130

CHAPTER 6 USING THE COMMUNICATIONS FUNCTION
JSetting the com-
munications
specifications
F Communications
parameters
Unit No.
Baud rate
Bit length
Parity
Stop bit
6–4
Match the communications specifications of the host computer and
E5CK T controller. When two or more controllers are connected to the
host computer, make sure that the communications specifications of all
controllers are the same.
This section describes how to set the communications specifications for
the E5CK T controller. For details on the host computer, see the relevant
manual supplied with the host computer.
Set the communications specifications of the E5CK T in the controller's
communications parameters. The communications parameters are set on
the front panel of the E5CK T controller.
The following table shows the communications parameters (option mode)
provided on the E5CK T controller and their respective settings.
Parameter/Symbol
Setting
0 to 99
1.2/2.4/4.8/9.6/19.2 (kbps)
7/8 (bit)
None/even/odd
1/2
Set Value
0 to 99
1.2/2.4/4.8/ 9.6 /19.2
7 /8
/ /
1/ 2
Inverted items are factory settings.