Alarm Value - Omron e5ck User Manual

CHAPTER 3 BASIC OPERATION
Setting Example
1 second min.
3–16
In this example, let's set the next program to pattern 0.
SP
Step 1
100
50
0.20
Time
SP
(hr, min.)
Step 0 50 0.00
Step 1 100 0.20
Step 2 100 0.40
Step 3 50 0.20
(1) Select the menu display, and select 
or keys. For details on selecting the menu display, see page 1 10.
(2) Press the key to enter the program mode. The top parameter in
the program mode 
tern 0".
(3) As the setting 0: pattern 0" in this example is to be left as it is, press
the key. The display changes to the [
rameter). Default is 8".
(4) Set the parameter to 4" pressing the
(5) When you press the
parameter). Default is 0".
(6) Set the parameter to 50" pressing the
(7) When you press the
time" parameter). Default is 0.00".
(8) As the setting 0.00: 0 minutes" in this example is to be left as it is,
press the key. The display changes to the [
rameter). Default is 0".
(9) Set the parameter to 100" pressing the
(10) In the same way, set the 
: step 2 time", 
that order.
(11) When you have finished setting the step SPs and times press the
key. The [ ] (pattern execution count" parameter, is displayed.
Default is 1".)
Step 2
0.40
Alarm
value 2
• Pattern execution count 1"
10
• Time signals are not used.
10
10
10
: program" pressing the
: pattern" is displayed. Default is 0 : pat
or
, the display changes to the [
, the display changes to the [
: step 1 time", 
: step 3 SP",  : step 3 time" parameters, in
Step 3
0.20
Time: hr, min
] (number of steps" pa
keys.
] (step 0 SP"
or keys.
] (step 0
] (step 1 SP" pa
or keys.
: step 2 SP",