If The Peripheral Is A Plotter - HP 8753E User Manual

. Choose SE&&& if your printer has a serial (RS-232) interface, and then configure the print
function as follows:
b. lb select the transmission control method that is compatible with your printer, press
appears:
data exchange by transmitting control characters to the network analyzer.
exchange by setting the electrical voltage on one line of the RS-232 serial cable.
Note
Because the ~%Vi%+#%J handshake takes place in the hardware rather than the

If the Peripheral Is a Plotter

printer choice appears:
q
. . . _ . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . _ . _ _ -.
2. Configure the analyzer for one of the following printer interfaces:
a. Enter the HP-IB address of the printer (default is Ol), followed by @.
b. Press ILocal] and ~~~~.~~~~~~~~~ if there is no external controller connected to
the HP-IB bus.
. ..)
.
. . . . : . . . 2 i = . ~ ~ ~ ~ ~ . . . . . . . ; ; . . ~ . . . . : . . . ~ . ; . .