HP 8753E User Manual page 595

Network analyzer

Hide thumbs Also See for HP 8753E:

Table of Contents

FILE NOT COMPATIBLE WITH INSTRUMENT

You cannot recall user graphics that had been saved on an earlier model of

analyzer with a monochrome display. These files cannot be used with the

FILE NOT FOUND

Error Number The requested file was not found on the current disk medium.

FILE NOT FOUND OR WRONG TYPE

Error Number During a resave operation, either the file was not found or the type of file was

not an instrument state flle.

FIRST CHARACTER MUST BE A LETTER

Error Number The first character of a disk file title or an internal save register title must be

an alpha character.

FORMAT NOT VALID FOR MEASUREMENT

Error Number Conversion measurements (Z or Y reflection and transmission) are not valid

with Smith chart and SWR formats.

FORMATTING DATA

The list information is being processed for a list data output to a copy device

and stored in the copy spool buffer. During this time, the analyzer's resources

are dedicated to this task (which takes less than a few seconds).

FREQ OFFSET ONLY VALID IN NETWORK ANALYZER MODE

Error Number You can only make frequency offset measurements in the network analyzer

FREQS CANNOT BE CHANGED, TOO MANY POINTS

Error Number The number of points selected for setting the low pass transform frequencies is

too high. Reduce the number of points so that the low pass criteria is met.

Show Quick Links

Table of Contents