Offset Limits Menu - HP 8753E User Manual

Phase iimit values can be specified between +500° and -500'. Limit values above + 180° and
below -18OO are mapped into the range of -180° to + 180° to correspond with the range of
phase data values.

Offset Limits Menu

This menu allows the complete limit set to be offset in either stimulus value or amplitude
value. This is useful for changing the limits to correspond with a change in the test setup, or
for device specifications that differ in stimulus or amplitude. It can also be used to move the
limit lines away from the data trace temporarily for visual examination of trace detail.
Application and Operation Concepts