11
automatically increased. Some parameter changes that cause an increase in
sweep time are narrower IF bandwidth, an increase in the number of points,
and a change in sweep type.
Error Number The fractional-N and digital IF circuits have lost synchronization. Refer to the
HP 8753E N&work AnuZgzzr Semrice
12
Information
The instrument is in a hold state and is no longer sweeping. To take a new
Message
3 3
command syntax.
Error Number The analyzer is in talker/listener mode. In this mode, the analyzer cannot
3 6
control a peripheral device on the bus Use the local menu to change to system
controller or pass control mode.
Error Number You have prematurely stopped a service test.
113
Error Number Ybu have set frequencies in the list that are outside of the allowable frequency
133
range for harmonic measurements, or are greater than 3 GHz on instruments
without Option 006. Reduce the frequency range of the list.
Error Messeges
1 O-26