Using The - HP 8753E User Manual

1. To set the frequency value of a iixed marker that appears on the analyzer display, press:
keypad.
The marker is shown on the display as a small delta (A), smaller than the inactive marker
triangles.
2. 'RI set the response value (dl3) of a fixed marker, press:
keypad.
In a Cartesian format, the setting is the y-axis value. In polar or Smith chart format, with a
magnitude/phase marker, a real/imaginary marker, an R + jX marker, or a G + jB marker, the
setting applies to the Crst part of the complex data pair. (F'ixed marker response values are
always uncoupled in the two channels.)
3. 'lb set the auxiliary response value of a lixed marker when you are viewing a polar or Smith
format, press:
This value is the second part of complex data pair, and applies to a magnitude/phase marker,
a real/imaginary marker, an R+ jX marker, or a G+ jB marker. (F'ixed marker auxiliary
response values are always uncoupled in the two channels.)