Usingamipr0 - HP 8753E User Manual

Using AmiPro
1. Prom the FILE pull-down menu, select IMPORT PICTURE.
2. In the dialog box, change the file Type selection to HPGL. This automatically changes the
Note
The network analyzer does not use the sutllx *. PIT, so you may want to change
the flename filter to * . * or some other pattern that will allow you to locate the
3. Click OK to import the tile.
4. The next dialog box allows you to select paper type, rotation (landscape or portrait), and pen
colors. You will probably need to change pen colors.
Note
The network analyzer uses pen 7 for text. The default color in Ami Pro for pen
7 is aqua, which is not very readable against the typical white background. You
may want to change pen 7 to black.
5. After all selections have been made, the fle is imported and rendered in a small graphics
frame which can be sized to the page by grabbing one of the nodes and stretching the box as
required.
You will notice that the annotation around the display is not optimum, as the Ami Pro
n
Printing, Plotting, and Saving Measurement Results 4-21