Rear Panel Features And Connectors - HP 8753E User Manual

Figure l-3 illustrates the features and connectors of the rear panel, described below.
Requirements for input signals to the rear panel connectors are provided in Chapter 7,
"Specifications and Measurement Uncertanuies n
1.
compatible peripherals, and other instruments for an automated system. Refer to the
"Compatible Peripherals" chapter in this document for HP-IB information, limitations, and
PARALLEL interface. This connector allows the analyzer to output to a peripheral with
2.
a parallel input. Also included, is a general purpose input/output (GPIO) bus that can
control eight output bits and read five input bits through test sequencing. Refer to the
"Compatible Peripherals" chapter for information on con@uing a peripheral. Also refer
to "Application and Operation Concepts" for information on GPIO.
3.
KEYBOARD input (mini-DIN). This connector allows you to connect an external
4.
keyboard. This provides a more convenient means to enter a title for storage ties, as well
as substitute for the analyzer's front panel keyboard.
Power cord receptacle, with fuse. For information on replacing the fuse, refer to the
5.
Line voltage selector switch. For more information refer to the HP 87533 Network
6.
7.
10 ME PRECISION REFERENCE OUTPUT. (Option lD5)
8.
9. 10 MHZ REFERENCE ADJUST. (Option lD5)
Figure 1-3. HP 8753E Bear Panel
HP 8753E Description and Options l-1 1