Chapter 6: Connecting and Configuring the Emulation Module
Configuring the Emulation Module
Processor clock speed configuration
Value
33
25
20
16
8
4
2
1
512
32
Use the cf dprocck command to display the default clock speed.
To set the default clock rate if the processor
clock rate is less than 8 MHz
For an emulation module, the default clock rate must be set using the
Emulation Control Interface.
1 End any Emulation Control Interface session for the emulation
module.
2 Right-click the Emulation Control Interface icon and select
Update Firmware....
3 Click Modify Lan Port....
152
Processor clock
Built-in command
is at least
33 MHz
cf procck=33
25 MHz
cf procck=25
20 MHz
cf procck=20
16 MHz
cf procck=16
8 MHz (default)
cf procck=8
4 MHz
cf procck=4
2 MHz
cf procck=2
1 MHz
cf procck=1
512 kHz
cf procck=512
32 kHz
cf procck=32
Solutions for CPU32