HP 8753E User Manual page 646

Instrument state1
I, P,
Four-channel instrument state
G Graphics
Error corrected data
D
Raw data
Formatted data
Cal
Cal data, channel 1
Cal data, channel 2
Memory trace data
Error corrected data (S2P)3
1 These are two-channel instrument states readable by previous fhmware versions.
2 Piles Rl through R8 will be saved if a full two-port calibration is active. If a full two-port
calibration is not active only Rl will be saved for Channel 1 and 3, and RS for Channel 2 and
4.
3 These flies are written only when a a-port error correction (full a-port or TRL) has been
applied.
If correction is on at the time of an external store, the calibration set is stored to disk. (Note
that inactive calibrations are not stored to disk.) When an instrument state is loaded into the
analyzer from disk, the stimulus and response parameters are restored first. If correction is on
for the loaded state, the analyzer will load a calibration set from disk that carries the same title
as the one stored for the instrument state.
1 Display graphics
0
1 Channel 1
2 Channel 2
a Channel 3
4 Channel 4
1 to 4 Channel 113, raw arrays 1 to 42
5 to 8 Channel 214, raw arrays 6 to 8
1 Channel 1
2 Channel 2
8 Channel 3
4 Channel 4
0
A
B
C Cuefiicient 12
1 Channel 1
2 Channel 2
Channel 3
4 Channel 4
1 Channel 1
2 Channel 2
State
Preset and Memory Allocation
124