Modify Calibration Kit Menu - HP 8753E User Manual

4. Store the modified calibration kit.
For a step by step procedure on how to modify calibration kits, refer to "Modifying Calibration
Kit Standards" located in Chapter 5, "Cptimizing Measurement Results. n

Modify Calibration Kit Menu

. . . , . / _ _
menu. This leads in turn to additional series of menus associated with modifying calibration
kits The following is a description of the softkeys located within this menu:
n
This number (1 to 8) is an arbitrary reference number used to reference standards while
specifying a class. The standard numbers for the predeilned calibration kits are as follows:
Although the numbering sequences are arbitrary, confusion can be mhdmized
Note
by using consistency. However, standard 5 is always a sliding load.
key to specify a class to group certain standards
reference.
is supplied, it will appear as one of the five softkey choices in the select cal kit menu. The
approach is similar to defining a display title, except that the kit label is limited to ten
characters.
standards are deilned and all classes are specified. Be sure to save the kit with the
Application and Operation Concepts
1 short(m)
open(m)
2
3 broadband load
4 t h r u
sliding load
5
6 lowband load
short(f)
7