HP 8753E User Manual page 608

Error Number You cannot perform sliding load measurements due to insufficient memory.
7 3
Increase the available memory by clearing one or more save/recall registers and
pressing preset), or by storing hles to a disk.
SOURCE POWER DISABLED,
Information When list power has been enabled and swept list mode is on, you will not be
Message
able to change the power level using the ~#@j&& key. lb change the power
level, edit the swept list table.
Information You have exceeded the maximum power level at one of the inputs and power
Message has been automaticahv reduced. The annotation PU indicates that power trip
has been activated. When this occurs, reset the power and then press ($&
STARTING COPY SPOOLER
Information The analyzer is beginning to output data from the spool buffer to the copy
device. The analyzer resumes normal operation; the data is being output to the
Message
copy device in the background.
Error Number The output frequency of the mixer cannot violate the minimum/maximum
141 frequency of the analyzer.
SWEEP MODE CHANGED TO CW TIME SWEEP
Error Number If you select external source auto or manual instrument mode and you do not
187
EDIT LIST
. . . . . . . . . . . . . .
MODE TBL